Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

80V 600A DC Series Winding Motor Speed Controller

Fully compatible with CURTIS PMC 1253-8001

The P153-8001 controller is designed as the replacement of CURTIS 1253-8001 controller (HELI forklift hydraulic pump motor controller model EVC255-8001).

Made by a Chinese manufacturer, the P153-8001 controller is fully compatible with CURTIS programming devices, and the quality had been approved by many vehicle makers. All parameters of P153-8001 are the same as its original version of CURTIS 1253-8001. So the buyer can take the CURTIS 1253 DC Series Motor Controller Manual as its own manual.

If you need to modify any controller parameter, please send us a message with the list of parameters to be modified (Click here to download the parameter list of default setting of controller 1253-8001 (PDF format)). There is no extra cost for reprogramming the controller.

Overview

The CURTIS 1253 provides a cost-effective solution for control of high power DC series-wound hydraulic pump motors. Its system integration features are designed primarily for Class I and Class II material handling vehicles. Typical applications include the pump systems of material handling trucks (counterbalance trucks, reach trucks), aerial lift platforms (scissor lifts, articulating/telescoping booms), and other industrial vehicles.

The 1253 accepts inputs from up to four Speed Select switches and also from an analog throttle. Its internal microprocessor-based logic controller provides maximum flexibility at minimum cost. Its performance characteristics can be tailored through an array of programmable parameters.

The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programming device provides diagnostic and test capability in addition to configuration flexibility.

Key Features

• Controller Model: P153-8001 (Replacement of CURTIS 1253-8001)
• Norminal Battery Voltage (Volts): 80V
• Amature Current Limit (amps): 600
• Programmable Undervoltage Cutback (Volts): 54–70
• Overvoltage Cutoff (Volts): 102
• PWM operating frequency: 15.6 kHz
• Electrical isolation to heatsink (min.): 500 VAC
• KSI input voltage: 47–102V DC
• KSI input current (no contactors engaged):
  • 60 mA without programmer
  • 130 mA with programmer
• Logic input current: < 1 mA
• Status LED output current (max.): < 2 mA
• Heatsink overtemperature cutback: linear cutback starts at 80°C; complete cutoff at 120°C
• Heatsink undertemperature cutback: 50% current below -25°C
• Operating ambient temperature range: -40°C to 50°C
• Storage ambient temperature range: -40°C to 85°C
• Package environmental rating: IP54
• Throttle Type:
  • Type 0: 0-5KΩ
  • Type 1: 5K-0Ω
  • Type 2: 0-5V
  • Type 3: single-ended 3-wire potentiometer (1kΩ to 10kΩ range)
• Dimensions: L196xW146xH77 mm
• Net Weight: 2.6 kg

80V 600A DC Series Winding Motor Speed Controller

Fully compatible with CURTIS PMC 1253-8001

The P153-8001 controller is designed as the replacement of CURTIS 1253-8001 controller (HELI forklift hydraulic pump motor controller model EVC255-8001).

Made by a Chinese manufacturer, the P153-8001 controller is fully compatible with CURTIS programming devices, and the quality had been approved by many vehicle makers. All parameters of P153-8001 are the same as its original version of CURTIS 1253-8001. So the buyer can take the CURTIS 1253 DC Series Motor Controller Manual as its own manual.

If you need to modify any controller parameter, please send us a message with the list of parameters to be modified (Click here to download the parameter list of default setting of controller 1253-8001 (PDF format)). There is no extra cost for reprogramming the controller.

Overview

The CURTIS 1253 provides a cost-effective solution for control of high power DC series-wound hydraulic pump motors. Its system integration features are designed primarily for Class I and Class II material handling vehicles. Typical applications include the pump systems of material handling trucks (counterbalance trucks, reach trucks), aerial lift platforms (scissor lifts, articulating/telescoping booms), and other industrial vehicles.

The 1253 accepts inputs from up to four Speed Select switches and also from an analog throttle. Its internal microprocessor-based logic controller provides maximum flexibility at minimum cost. Its performance characteristics can be tailored through an array of programmable parameters.

The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programming device provides diagnostic and test capability in addition to configuration flexibility.

Key Features

• Controller Model: P153-8001 (Replacement of CURTIS 1253-8001)
• Norminal Battery Voltage (Volts): 80V
• Amature Current Limit (amps): 600
• Programmable Undervoltage Cutback (Volts): 54–70
• Overvoltage Cutoff (Volts): 102
• PWM operating frequency: 15.6 kHz
• Electrical isolation to heatsink (min.): 500 VAC
• KSI input voltage: 47–102V DC
• KSI input current (no contactors engaged):
  • 60 mA without programmer
  • 130 mA with programmer
• Logic input current: < 1 mA
• Status LED output current (max.): < 2 mA
• Heatsink overtemperature cutback: linear cutback starts at 80°C; complete cutoff at 120°C
• Heatsink undertemperature cutback: 50% current below -25°C
• Operating ambient temperature range: -40°C to 50°C
• Storage ambient temperature range: -40°C to 85°C
• Package environmental rating: IP54
• Throttle Type:
  • Type 0: 0-5KΩ
  • Type 1: 5K-0Ω
  • Type 2: 0-5V
  • Type 3: single-ended 3-wire potentiometer (1kΩ to 10kΩ range)
• Dimensions: L196xW146xH77 mm
• Net Weight: 2.6 kg