Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

Model: EFP-001

Battery Powered Golf Cart & Mobility Vehicle Foot Pedal Throttle

Wiring Diagram

Embedded in a solid ZAMAC alloy body, EFP-001 is a 2-wire potentiometer type foot pedal throttle, designed for feeding speed signal to the motor speed control unit of battery powered golf cart and mobility vehicle. For example, when the throttle EFP-001 works with CURTIS 1204M / 1205M / 1221M programmable motor controller, the throttle type parameter of controller should be set as "Type 0, 2-wire potentiometer, 0–5kΩ".

With an internal normal open micro-switch, foot pedal throttle EFP-001 offers control function for electric vehicles. Typically the throttle switch is used for feeding the control signal (B+) to direction changeover (forward / reverse) contactor for making sure that the electric motor will only be powered on after the throttle foot pedal is stepped down. It is an effective design for avoiding the accidental movement of electric motor, when the throttle initial output is not neutral (0Ω).

The foot pedal of throttle EFP-001 could be fixed at on either side of the two ends of its rotating shaft, offering easy access from different mounting angle. An installation kit (2 x M8 bolts nuts and washers) is provided.

Installation Kit & Mating Connector

Specifications:

• The foot pedal could be installed at both ends of rotating shaft
• Signal output: 0-5KΩ  ± 0.1KΩ
• Solid metal case, ingress protection: IP55
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Key Features:

• Model: EFP-001
• Signal output: 0-5KΩ  ± 0.1KΩ
• Switch on/off signal: 0V - power supply voltage
• Operation temperature range: -55℃ –120℃
• Storage temperature range: -40°C - 80°C
• Ingress protection: IP55
• MechnicMechanicalal lifespan: 1,000,000 times
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Dimensions:

Connector & terminals' definition:

Embedded in a solid ZAMAC alloy body, EFP-001 is a 2-wire potentiometer type foot pedal throttle, designed for feeding speed signal to the motor speed control unit of battery powered golf cart and mobility vehicle. For example, when the throttle EFP-001 works with CURTIS 1204M / 1205M / 1221M programmable motor controller, the throttle type parameter of controller should be set as "Type 0, 2-wire potentiometer, 0–5kΩ".

Wiring Diagram

With an internal normal open micro-switch, foot pedal throttle EFP-001 offers control function for electric vehicles. Typically the throttle switch is used for feeding the control signal (B+) to direction changeover (forward / reverse) contactor for making sure that the electric motor will only be powered on after the throttle foot pedal is stepped down. It is an effective design for avoiding the accidental movement of electric motor, when the throttle initial output is not neutral (0Ω).

Connector & terminals' definition:

The foot pedal of throttle EFP-001 could be fixed at on either side of the two ends of its rotating shaft, offering easy access from different mounting angle. An installation kit (2 x M8 bolts nuts and washers) is provided.

Specifications:

• The foot pedal could be installed at both ends of rotating shaft
• Signal output: 0-5KΩ  ± 0.1KΩ
• Solid metal case, ingress protection: IP55
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Installation Kit & Mating Connector

Key Features:

• Model: EFP-001
• Signal output: 0-5KΩ  ± 0.1KΩ
• Switch on/off signal: 0V - power supply voltage
• Operation temperature range: -55℃ –120℃
• Storage temperature range: -40°C - 80°C
• Ingress protection: IP55
• Mechanical lifespan: 1,000,000 times
• Installation kit is included: bolts, nuts and washes
• Mating connector is included
• Net weight: 1.10 kg (with installation kit and mating connector)

Dimensions: