Free shipping to:

America: Canada, USA, Mexico

Africa: South Africa

Asia: Cambodia, China, HongKong, Indonesia, Japan, Macau, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, Vietnam

Europe: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Netherland, Norway, Sweden, Switzerland, United Kingdom

Oceania: Australia, New Zealand

Russia (not available for far regions, the delivery delay may be 20-45 working days, depending on the destination, please contact us before making your purchase)

For more details, click here...

E-Z-GO Forward / Reverse Switch

Part number 73036G01 / 70578G01 / 70578G02

This forward / reverse switch assembly fits the following E-Z-GO cart models:

• 1994-up TXT
• Medalist
• Utility vehicles with 36 volt series drive system, except DCS or PDS carts

Please make sure that the connection to batteries are disconnected before installing this direction selector. It is strongly recommended that 4 Gauge (4 AWG) cable and heavy duty solenoid (HD contactor) should be used.

This forward / reverse switch assembly is a must if you have a high amperage controller or upgraded motor.

Features:

• Designed for heavy duty and long term direction selecting options
• Tested for the toughest condition
• Easy installation

If the direction of shift linkage is wrong, please unscrew the nut on the back and rotate the shift linkage by 90 degrees until three places are parallel (as shown in the photos below). Then it can work normally.

E-Z-GO Forward / Reverse Switch

Part number 73036G01 / 70578G01 / 70578G02

This forward / reverse switch assembly fits the following E-Z-GO cart models:

• 1994-up TXT
• Medalist
• Utility vehicles with 36 volt series drive system, except DCS or PDS carts

Please make sure that the connection to batteries are disconnected before installing this direction selector. It is strongly recommended that 4 Gauge (4 AWG) cable and heavy duty solenoid (HD contactor) should be used.

This forward / reverse switch assembly is a must if you have a high amperage controller or upgraded motor.

Features:

• Designed for heavy duty and long term direction selecting options
• Tested for the toughest condition
• Easy installation

If the direction of shift linkage is wrong, please unscrew the nut on the back and rotate the shift linkage by 90 degrees until three places are parallel (as shown in the photos below). Then it can work normally.